Kabel testowy EXFO SPSB-B-1000-88-104 jedno-modowy
EXFO SPSB-B-1000-88-104 Singlemode Launch Test Cable
Poproś o wycenę
EXFO SPSB-B-1000-88-104 to kabel testowy 1000m jedno-modowy ze złączami SC/APC i LC/APC do eliminacji martwej strefy OTDR.
Szczegóły produktu
| Model | SPSB-B-1000-88-104 |
| Producent | EXFO |
| Kategoria | Urządzenia do testowania sieci i włókien optycznych |
| Dostępność | Na zamówienie |
Opis
Przegląd
EXFO SPSB-B-1000-88-104 to przenośny kabel testowy uruchamiający (pudełko tłumienia impulsu) używany z optycznymi reflektometrami czasowymi (OTDR) do dokładnej charakterystyki włókna. Ten 1000m kabel jedno-modowy pokrywa martwą strefę OTDR, umożliwiając precyzyjny pomiar strat przy połączeniach włókna, które w innym przypadku byłyby niemożliwe do zmierzenia.
Kluczowe cechy
- 1000m włókno jedno-modowe (9/125 µm)
- Złącza SC/APC (88) i LC/APC (104)
- Strata wstawienia złącza poniżej 0,5 dB
- Odbicie złącza poniżej −60 dB (APC)
- Projekt przenośnego miękkiego etui
- Umożliwia pomiar strat przy pierwszym i ostatnim połączeniu włókna
- Zmniejsza połączenia złącza OTDR w celu wydłużenia żywotności urządzenia
- Szeroki wybór opcji złącz dostępnych w tej rodzinie produktów
Zastosowania
- Charakterystyka włókna OTDR i powstawanie sieci
- Instalacja i rozwiązywanie problemów z łączami włóknistymi
- Pomiar strat w krytycznych połączeniach włókna
- Zapewnianie jakości testowania sieci włóknistych i łączy
Specyfikacja
| Choice of Configurations | Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone used for the tests. For instance, a 1 µs pulse is approximately 100 m long; selecting a 150 m SPSB or a 300 m LTC/PSB would therefore be appropriate. EXFO offers three types of launch cables: ▪ The FTB-LTC module combines with an FTB-7000 series OTDR module in the FTB-500 or FTB-200 platform ▪ The stand-alone PSB comes in a rugged, compact carrying case ▪ The portable SPSB comes in a soft, easy-to-carry-everywhere pouch |
| How it Works | Link characterization is often performed using an OTDR. But even though an OTDR has the shortest dead zones, because of the way loss is measured in a link, it does not allow the characterization of the first and last connectors without using a launch test cable, also called a pulse suppressor box. The loss value associated with an event is the difference between the backscattering levels measured before and after the event. To account for the OTDR’s dead zone, obtaining a backscattering level before the first connector requires inserting a certain length of fiber between the OTDR port and the first connector of the fiber under test. At the other end of the link, the same length of fiber is added after the last connector of the “receive” cable. In order to obtain an accurate, complete picture of the system’s loss—which is a critical aspect of fiber commissioning—a launch test cable should always be used at both ends of the fiber link. |
| Feature | Parameter |
| Feature | Description |
| SPSB-B-1000 | Soft pulse suppressor bag, singlemode fiber 9/125, 1000 m |
| 88 | SC/APC narrow key |
| 104 | LC/APC |
Poproś o wycenę
Kabel testowy EXFO SPSB-B-1000-88-104 jedno-modowy
Odpowiedź w ciągu 24 godzin
Bez zobowiązań
Bezpośredni kontakt